| 모델 | SCN-800-12 | SCN-800-15 | SCN-800-24 | SCN-800-48 | |
| 산출 | DC 전압 | 12V | 15V | 24V | 48V |
| 전압 허용 오차 | ±1% | ±1% | ±1% | ±1% | |
| 정격전류 | 66A | 54A | 33A | 16.6A | |
| 현재 범위 | 0-66A | 0-54A | 0-33A | 0-16.6A | |
| 정격 출력 | 800W | 800W | 800W | 800W | |
| 리플 및 노이즈 | 150mVp-p | 150mVp-p | 240mVp-p | 480mVp-p | |
| DC Adjustment Range | ±5%; Can adjust from 40%~100% output voltage by external control 2-5V | ||||
| Setup, Rise, Hold Time | 800ms, 50ms, 16ms at full load | ||||
| 입력 | 전압 범위 | 90~130VAC / 180~260 VAC47~63 Hz; selected by switch260~370VDC | |||
| 교류 전류 | 13A/115 VAC 8.0A/ 230 VAC | ||||
| 능률 | 80% | 81% | 85% | 87% | |
| 돌입 전류 | 60A/230V | ||||
| 누설 전류 | 3.5 mA/240VAC | ||||
| 보호 | Over Load | 110%~135% | |||
| Protection: Protection: Current limiting, delay shut down o/p voltage, re-power on to recover | |||||
| 과전압 | 110%~135% | ||||
| 보호 유형: o/p 전압을 차단하고 복구하려면 전원을 다시 켜세요. | |||||
| Over-Temp | TSW1(Power transistor) When temp. >100 °C, shut down o/p voltage, re-power on to recover | ||||
| 환경 | Working Temp. Humidity | -10°C ~ +65°C, 20%~90%RH | |||
| 보관 온도 습기 | -20°C ~ +85°C, 10%~95%RH | ||||
| 진동 | 10~200Hz, 2G 10min./1cycle, the period for 60min, each along X, Y, and Z axes | ||||
| 안전 | 내전압 | I/P-O/P, I/P-FG: 1500VAC | |||
| 절연 저항 | I/P-O/P, I/P-FG, >100M Ohms / 500VDC | ||||
| 기준 | Safety Standard | Design refer to UL1950,CSA22.2,IEC60950 | |||
| EMC 표준 | Design refers to FCC Part 15 Class A | ||||
| 기타 | 무게 | 2.3Kg; | |||
| 포장 | 6pcs/ ctn | ||||
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C of ambient temperature. | ||||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. | |||||
| 3. Tolerance: includes set up tolerance, line regulation, and load regulation. | |||||
| 4. The power supply is considered a component that will be installed into the final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | |||||
정전압 800w 48V 17A DC 48V 스위칭 전원 공급 장치
WeHo professional 800W Switching SCN series Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115/230V AC range selectable by the switch, air cooling by the built-in fan.Filter capacitance; High withstand voltage; Low dissipation; Large capacity. Widely being used in Industrial automation, LED display, electronic equipment, communications, etc.If you have any questions, please do not hesitate to contact us at 이메일: [email protected]
- 설명
The DC Adjustment Range is ±5%. The output voltage can be controlled via an external control that uses 2-5V, and it can be adjusted from 40% to 100%.
우리는 15년의 경험을 가진 전원 공급 장치 제조업체입니다.
This product can take input of 90~132VAC or 180~264VAC through a switch and has a frame.
Our company’s main focus is on the power supply.
The product’s AC current is 13A/115 VAC and 8.0A/230 VAC.
Products of this nature can be attached in parallel.
We accepted a sample for testing.
This shipment is to be paid for by the recipient (“freight collect”) or by the sender (“freight prepaid”).
제품 크기: 291*132*68mm (L * W * H)
